Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Dryer Vent Cleaning for Aurora Homeowners
Lint builds up inside a dryer vent the way dust builds on a shelf, slowly and out of sight, until airflow drops and the dryer starts taking two cycles to finish a load. That’s the point where most Aurora homeowners start looking for help, and it’s the right call. Lint-clogged vents are the leading cause of residential dryer fires, and the NFPA treats vent cleaning as part of routine home safety rather than an optional upgrade. Our technicians have up to 10 years of experience with professional-grade equipment, and we offer same-day dryer vent cleaning in Aurora when the schedule allows. If your laundry is running hot, slow, or smelling faintly of scorched fabric, stop using the dryer until it’s checked. Call (888) 364-6081. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Dryer Vent Cleaning Service
Dryer Vent Cleaning Service is the full removal of lint, dust, and debris from the entire vent run, from the point where the duct connects at the back of the dryer all the way through the exterior termination. You need it when drying times stretch out, when the outside flapper stays shut or barely moves, or when it’s simply been a long stretch since the last cleaning. In Aurora, long cold winters mean the dryer runs hard from November through March, and lint compacts faster in a vent that sees constant use. We run a rotary brush and vacuum system through the whole line, then show you before-and-after photos of what came out. A typical whole-system cleaning runs $120-$220 depending on vent length, routing, and how much has built up.
What Happens During a Cleaning
We disconnect the vent at the dryer, run the cleaning tools through the full duct length, and clear the exterior hood and flapper. Every inch gets worked, not just the section closest to the machine where a hand can reach. The vent gets reassembled and tested before we pack up.
Rigid Duct and Flexible Line
Most homes have either rigid metal duct or the flexible foil type, and each one cleans differently. Rigid duct holds its shape and cleans thoroughly with a brush head. Flexible line can sag and trap lint in the low spots, so we inspect the routing and confirm it isn’t crushed or looping before we clean.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Dryer Vent Installation
Dryer Vent Installation is the routing and fitting of a new vent line from the dryer to an exterior wall, and it’s the right call when an existing vent is beyond repair, when a remodel relocates the laundry, or when a new appliance needs a proper run. Older Aurora homes sometimes have vents that were sized or routed inadequately from the start, and a fresh installation fixes the problem at its root rather than cleaning around it. We plan the shortest, straightest path to the exterior, use smooth metal duct wherever possible, and seal every joint. Installation typically runs $250-$450 depending on run length, wall penetration, and how much framing or trim work the job needs. If your current vent has to be replaced, doing it once correctly costs less than repeated band-aid repairs.
Choosing the Route
The shortest path to outside with the fewest elbows is always the goal. Every bend in a vent slows airflow and gives lint a place to collect. We work out the route before the first hole is cut.
Termination and Flapper
The exterior termination needs a working flapper that keeps out rain, snow, and animals while opening freely under airflow. A stuck flapper is one of the most common causes of a dryer that seems fine but vents poorly. We set and test the hood as part of the job.
Dryer Vent Repair
Dryer Vent Repair covers the physical fixes a vent needs when it’s damaged, disconnected, crushed, or leaking, and it’s what to book when cleaning reveals a problem the cleaning alone can’t solve. Common finds in Aurora homes include flexible duct that’s been crushed behind the dryer, joints that have worked loose, exterior hoods that have come apart, and foil tape that has failed. We inspect as we clean, so when we spot damage we can fix it in the same visit rather than sending you to a second contractor. Repair pricing typically falls in the $150-$350 range depending on the fix and the parts needed. Your written estimate sets the final price before any work starts.
Fixing Crushed Duct
A dryer pushed too far back against the wall can crush a flexible vent almost flat, and no amount of cleaning helps a vent the air can’t move through. We straighten the routing, shorten the run where possible, and set the dryer so it doesn’t happen again.
Sealing Loose Joints
Loose joints leak lint-laden air into the wall cavity, which is both a fire risk and a moisture problem. We reseal every connection with proper vent tape and clamp it firmly. That seals the line and keeps the airflow where it belongs.
Dryer Vent Cleaning Company
A Dryer Vent Cleaning Company that also inspects and repairs is what you actually want, because a vent problem rarely stops at lint removal. Aurora Duct Cleaning is an equipment-serious duct specialist that handles cleaning, repair, and installation under one roof, using Rotobrush and Nikro systems built for ductwork rather than consumer tools. If you’ve had a coupon cleaner do a quick pass with a shop vac and nothing changed, that’s a common result: surface cleaning without a full run doesn’t restore airflow. When you call a cleaning company, ask what equipment they use and whether they inspect the exterior hood and the full duct length. Whole-home pricing for a proper cleaning runs $120-$220. We can work with the rest of your duct system too, and our Aurora Duct Cleaning team handles air ducts and repairs alongside vents.
What to Ask Before Booking
Ask whether the price covers the whole vent run or only the visible section, and whether before-and-after photos are included. Ask about the equipment too. A company that cleans ductwork professionally will tell you exactly what tools it runs.
Why Equipment Matters Here
Lint packs tight against duct walls, and a light vacuum pass doesn’t break it loose. Rotary brush heads work the full inner surface while the vacuum draws the loosened material out. That’s the difference between a clean vent and a vent that looked clean for a day.
Dryer Vent Inspection
Dryer Vent Inspection is a full diagnostic of the vent system, checking airflow, duct condition, routing, and the exterior termination for problems a routine cleaning can miss. It’s worth booking when the dryer is underperforming but the vent was cleaned recently, when you’ve just moved into a home and don’t know the vent’s history, or as an annual safety check. We measure airflow, look for crushed or disconnected ducting, confirm the exterior flapper works, and check whether lint is accumulating in places it shouldn’t. If the inspection turns up a repair, we quote it before doing the work. Inspections typically run $75-$150, and they’re often folded into a scheduled cleaning at no extra cost. The answer you get is specific: what’s wrong, what it costs to fix, and whether it can wait.
Airflow and Static Pressure
Measuring airflow tells us how hard the dryer’s blower has to work to move air. Restricted airflow shows up as higher static pressure, and that reading tells us how much lint or damage is in the line. It’s a diagnostic, not a guess.
Exterior Termination Check
The outside hood is where serious blockages often start, and it’s the part most people never look at. We check the flapper, clear any nesting material or lint buildup, and confirm the hood opens the way it should under load.
Commercial Dryer Vent Cleaning
Commercial Dryer Vent Cleaning covers the vent systems in laundromats, apartment buildings, gyms, salons, and any multi-unit property where dryers run constantly and lint accumulates far faster than in a home. A single commercial dryer can put more lint through a vent in a week than a household machine does in months, so cleaning intervals need to be tighter and the paperwork needs to be on file. We clean the full vent run, clear exterior terminations, and provide before-and-after photos and written documentation of what was done, which property managers need for their records. Commercial pricing is quoted per system based on run length, number of dryers, and roof or wall access; typical jobs start around $300 and scale with the system size. The written estimate sets the final price.
Documentation for Property Managers
We photograph before and after and put the scope of work in writing. That record matters when an insurer, inspector, or tenant asks when the vents were last cleaned. You’ll have something concrete to show.
Scheduling Around Operations
Commercial work gets planned around business hours so the lines don’t sit idle. We coordinate the visit so it fits your operating schedule. Fast dispatch from 7am to 7pm, Sunday through Friday, gives you options.
Brands We Service
We service Honeywell and Aprilaire indoor air quality systems and know how those systems connect to the rest of the ductwork in a home. When a whole-home air cleaner or humidifier ties into the duct system, vent problems and duct problems can affect how it performs, and having familiarity with the equipment keeps the diagnosis accurate instead of guessed at.
Our cleaning equipment comes from Rotobrush and Nikro, professional-grade systems used in duct cleaning and restoration work rather than hardware-store tools. Whether you have Honeywell, Aprilaire, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
Some warning signs are worth acting on before the next load goes in the dryer. These are the ones we hear most in Aurora.
- Clothes take two cycles to dry: A drop in drying speed means restricted airflow, and the dryer’s heating element is running longer and hotter than it should. That’s the number-one signal lint is blocking the line.
- The dryer or the load is hot to the touch: A machine that’s hot on top or a load that comes out unusually warm suggests heat is trapped instead of venting out. Stop using it and get the vent checked before the next load.
- A burning or scorched smell: That smell is the clearest warning there is, and it means lint is contacting hot components. Turn the dryer off and leave it off until the vent is inspected.
- Lint collects around the back of the dryer: Visible lint outside the vent connection means the joint is loose or the line is backing up. Both need attention, and neither gets better on its own.
- The exterior flapper never moves: Step outside while the dryer runs. If you don’t feel warm air moving and the flapper stays shut, the line is blocked somewhere in the run.
Our Process, Step by Step
- 1
Inspect the full run first. We trace the vent from the dryer connection to the exterior termination, checking routing, condition, and the exterior hood before touching anything. This is how we know what the job actually involves.
- 2
Protect the space. Drop cloths and surface protection go down before equipment comes in. We work with Guardsman-associated standards for care during in-home service visits.
- 3
Clean with professional equipment. We run Rotobrush and Nikro tools through the entire duct length, working the full inner surface rather than just the reachable end. Lint and debris are drawn out with the vacuum running as we go.
- 4
Photograph before and after. You get real images of your own vent system, not a stock photo. Seeing what came out settles the question of whether the work was actually done.
- 5
Quote any repair on the spot. If we found a crushed duct, loose joint, or failing hood, we quote it on the spot before we fix it. One flat price per system, agreed in writing, before the work starts.
How Much Does Dryer Vent Cleaning Cost in Aurora?
A typical dryer vent cleaning in Aurora runs $120-$220 depending on vent length, how much lint has built up, and the routing. The factors that move a price: how far the vent runs to the exterior, how many elbows it has, whether it’s flexible or rigid duct, and whether it goes through a wall or a roof. Roof-terminated vents take more work, and so does a run that’s been neglected for several years. A few things to watch if you want to avoid overpaying. Be wary of a very low advertised price that turns into a much bigger invoice once the technician is on site; the classic version of that is a teaser rate that becomes a pitch for repairs you didn’t ask for. Ask for the price to cover the whole system, not just the section near the machine, and ask whether photos come with the job. Ours does both, and the written estimate sets the final price. A full estimate is free: we look at the vent, tell you what it needs, and give you one flat price per system agreed before the work starts. Call (888) 364-6081 for an exact quote.
Our Service Area Near Aurora
We work across Aurora and the surrounding Fox Valley towns, including North Aurora, Montgomery, Batavia, Oswego, Warrenville, and Sugar Grove. We also cover Stone Park, Cortland, and Palos Park. Dispatch runs from 7am to 7pm, Sunday through Friday, and scheduling usually gets you an appointment within a day or two. If you want the full picture of what we do, our dryer vent cleaning page covers the whole-system approach, and we also handle dryer vent cleaning and dryer vent cleaning throughout the surrounding communities.
Serving Aurora, IL – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Dryer Vent Cleaning in Aurora
Dryer vent cleaning is the removal of lint and debris from the duct that carries hot, moist air from your dryer to the outside of your home. The whole path gets cleaned, from the dryer connection to the exterior hood, not just the visible section. Lint that accumulates in this duct restricts airflow and creates a fire risk, which is why the NFPA treats vent cleaning as routine home safety. If your dryer is slow or hot, that’s usually the reason.
Most residential jobs take 45 minutes to an hour and a half, depending on vent length and how much buildup there is. A short, straight run cleans fast; a long line with several elbows and heavy lint takes longer. We’ll tell you the expected time when you book, so you can plan around it. If a repair turns up, that adds time and we quote it before starting.
A typical whole-system cleaning in Aurora runs $120-$220. Price depends on vent length, routing, whether the duct is rigid or flexible, and how much lint has accumulated. Inspections usually run $75-$150 and are often included with a cleaning, while repairs range $150-$350 depending on the fix. Call (888) 364-6081 for an exact quote. Estimates are free, and the written estimate sets the final price.
Yes, we work with Honeywell and Aprilaire equipment. We service those systems and know how they connect to the rest of the ductwork, which keeps the diagnosis accurate when air quality equipment shares the same duct system. If your vent problem and an IAQ system issue overlap, we can look at both during the same visit. Whether you have Honeywell, Aprilaire, or any other make, we can help.
Yes, same-day cleaning is often available when the schedule allows, and we’ll tell you up front whether we can fit you in that day. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. If your dryer smells like it’s burning or runs unusually hot, stop using it and call first.
We stand behind the work with before-and-after photos of your own vent system so you can see exactly what was done. If something doesn’t look right after the visit, call us and we’ll come back and look at it. Any repair work gets quoted and approved in writing before we start. Call (888) 364-6081 to discuss the specifics for your job.
Clear access to the back of the dryer and the vent connection, and move anything stacked on top or in front of the machine if you can. If your vent terminates on the roof or through an exterior wall, make sure we can reach that side of the home. You don’t need to do anything else; we protect the floors and surfaces before we start. Call (888) 364-6081 if you’re unsure about access.
Schedule Your Dryer Vent Cleaning Service in Aurora Today
If your dryer is running slow, running hot, or you can’t remember the last time the vent was cleaned, now is the time to book. We offer a no-obligation free estimate, one flat price per system agreed before the work starts, and before-and-after photos of your own ducts so you know the work got done. Call (888) 364-6081. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Aurora Duct Cleaning.